|
|
|
List of National Domain Ballots/Vote On Consensus Draft |
| Found: 52 |
Stage 30.00 |
Domain List |
| Code |
Edition |
Title |
Domain |
Date Due (dd/mm/yyyy) |
|
prEN0000 - ABCD |
- |
Glass fibre thermosetting preimpregnates 8 harness satin weave 'E'glass/adhesive epoxy preimpregnate - Cured up to 125°C for continuous use up to 80°C Nominal cured ply thickness 0,230 mm |
Mat-NM |
1/1/2001 |
|
prEN2283 |
P1 |
Testing of aircraft wiring |
Elec |
10/10/2008 |
|
prEN2997-009 |
P3 |
Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 009: Protective cover for receptacle - Product standard |
Elec |
10/10/2008 |
|
prEN2997-010 |
P3 |
Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 010: Protective cover for plug - Product standard |
Elec |
10/10/2008 |
|
prEN3475-407 |
P4 |
Aerospace series - Cable, electrical, aircraft use - Test methods - Part 407: Flammability |
Elec |
7/7/2008 |
|
prEN3660-003 |
P3 |
Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 003: Grommet nut, style A for EN 2997 and EN 4067 - Product standard |
Elec |
27/9/2008 |
|
prEN3660-004 |
P3 |
Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 004: Cable outlet, style A, straight, unsealed with clamp strain relief for EN 2997 and EN 4067 - Product standard |
Elec |
27/9/2008 |
|
prEN3660-005 |
P3 |
Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors- Part 005: Cable outlet, style A, 90°, unsealed with clamp strain relief for EN 2997 and EN 4067 - Product standard |
Elec |
27/9/2008 |
|
prEN3660-010 |
- |
Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 010: Cable outlet, style K, straight, for heat shrinkable boot, with braid termination spigot for EN 2997 and EN 4067 - Product standard |
Elec |
29/6/2008 |
|
prEN3660-011 |
- |
Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors – Part 011: Cable outlet, style K, 90°, for heat shrinkable boot, with braid termination spigot for EN 2997 and EN 4067 - Product standard |
Elec |
29/6/2008 |
|
prEN3660-036 |
P1 |
Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 036: spacer pad for cable outlet, style ? - Product standard |
Elec |
6/4/2008 |
|
prEN3719 |
P3 |
Aerospace series - Aluminium or aluminium alloy conductors for electrical cables - Product standard |
Elec |
4/11/2008 |
|
prEN4535-1 |
- |
Bushes, flanged, aluminium alloy with self-lubricating liner, elevated load - Metric series - Dimensions |
Mech |
// |
|
prEN4604-002 |
P3 |
Aerospace series - Cable, electrical, for signal transmission - Part 002 : General |
Elec |
20/4/2008 |
|
prEN4604-008 |
P1 |
Aerospace series - Cable, electrical, for signal transmission - Part 008: Cable, coaxial, 50 ohms, 200°C., Type WD - Product standard |
Elec |
7/6/2008 |
|
prEN4632-003 |
P1 |
Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 003: Homogeneous assemblies of unalloyed and low alloy steels |
Mat-M |
10/7/2008 |
|
prEN4632-005 |
P1 |
Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 005 : Homogeneous assemblies heat resisting Ni or Co base alloys |
Mat-M |
10/7/2008 |
|
TR4653 |
1 |
Aerospace series - Technical specification of plating of connectors Cadmium and hexavalent Chromium replacement |
Elec |
9/5/2008 |
|
prEN4655 |
P1 |
Aerospace series - Steel FE-PM____ (X1CrNiMoAlTi12-10-2) - Vacuum induction melted and consumable electrode remelted – Solution treated and precipitation treated - Bars – a or D < = ? 200 mm – Rm > = ??1400 Mpa |
Mat-M |
16/8/2008 |
|
prEN4656 |
P1 |
Aerospace series - Steel FE-PM____ (X1CrNiMoAlTi12-11-2) - Vacuum induction melted and consumable electrode remelted – Solution treated and precipitation treated - Bars - A or d < =200 mm - Rm < = ??1520 Mpa |
Mat-M |
14/8/2008 |
|
prEN4657 |
P1 |
Aerospace series - Steel FE-PM____ (X1CrNiMoAlTi12-11-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bars - A or D < = 200 mm - Rm > = 1650 Mpa |
Mat-M |
14/8/2008 |
|
prEN4658 |
P1 |
Aerospace series - Steel FE-PM____ (X1CrNiMoAlTi12-11-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - A or D < = 200 mm - Rm > = 1520 Mpa |
Mat-M |
14/8/2008 |
|
prEN4659 |
P1 |
Aerospace series - Steel FE-PM____ (X1CrNiMoAlTi12-11-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - A or D < = 200 mm - Rm > = 1650 Mpa |
Mat-M |
14/8/2008 |
|
prEN4660-001 |
P1 |
Modular and Open Avionics Architectures - Part 1 : Final Draft of Proposed Standards for Architecture |
Eng-Proc |
4/7/2008 |
|
prEN4660-002 |
P1 |
Modular and Open Avionics Architectures - Part 2 : Final Draft of Proposed Standards for Common Functional Modules |
Eng-Proc |
4/7/2008 |
|
prEN4660-003 |
P1 |
Modular and Open Avionics Architectures - Part 3 : Final Draft of Proposed Standards for Communications/Network |
Eng-Proc |
4/7/2008 |
|
prEN4660-004 |
P1 |
Modular and Open Avionics Architectures - Part 4 : Final Draft of Proposed Standards for Packaging |
Eng-Proc |
4/7/2008 |
|
prEN4660-005 |
P1 |
Modular and Open Avionics Architectures - Part 5 : Final Draft of Proposed Standards for Software |
Eng-Proc |
4/7/2008 |
|
TR4661 |
1 |
Aerospace series - Hinges, flight controls - Materials |
Mech |
16/7/2008 |
|
prEN4662 |
P1 |
Aerospace series - Test specification for vibration control components |
Mech |
11/10/2008 |
|
prEN4663 |
P1 |
Aerospace series - Electronic Interface for In-flight Entertainment Systems |
Elec |
12/10/2008 |
|
prEN4670 |
P1 |
Aerospace series - Steel FE-PM____ (X1CrNiMoAlTi12-11-2) - Vacuum induction melted and consumable electrode remelted - Softened - Forging stock - A or D < = 300 mm |
Mat-M |
14/8/2008 |
|
prEN4671 |
P1 |
Aerospace series - Steel FE-PM____ (X1CrNiMoAlTi12-10-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D < = 200 mm - Rm > = 1400 Mpa |
Mat-M |
14/8/2008 |
|
prEN4672 |
P1 |
Aerospace series - Steel FE-PM____ (X1CrNiMoAlTi12-10-2) - Vacuum induction melted and consumable electrode remelted - Softened - Forging stock - a or D < = 300 mm |
Mat-M |
14/8/2008 |
|
prEN4673-001 |
P1 |
Aerospace series - Inserts, UNJ threads, self-locking, with self-broaching keys - Part 1 : Installation and removal procedure |
Mech |
30/10/2008 |
|
prEN4673-002 |
P1 |
Aerospace series - Inserts, UNJ threads, self-locking, with self-broaching keys - Part 2 : Design standard |
Mech |
30/10/2008 |
|
prEN4673-003 |
P1 |
Aerospace series - Inserts, UNJ threads, self-locking, with self-broaching keys - Part 3 : Technical specification |
Mech |
27/10/2008 |
|
prEN4673-004 |
P1 |
Aerospace series - Inserts, UNJ threads, self-locking, with self-broaching keys - Part 4 : in heat resisting nickel base alloy Ni-P100HT (Inconel 718), silver plating |
Mech |
30/10/2008 |
|
prEN4673-005 |
P1 |
Aerospace series - Inserts, UNJ threads, self-locking, with self-broaching keys - Part 5 : in heat resisting nickel base alloy Ni-P101HT (WASPALOY), silver plating |
Mech |
30/10/2008 |
|
prEN4673-006 |
P1 |
Aerospace series - Inserts, UNJ threads, self-locking, with self-broaching keys - Part 6 : in heat resisting steel FE-PA2601 (A286), MoS2 coated |
Mech |
30/10/2008 |
|
prEN6049-002 |
P2 |
Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 002: Performance specification |
Elec |
11/10/2008 |
|
prEN6049-006 |
P4 |
Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 006: Self-wrapping protective sleeve, flexible post installation - Product standard |
Elec |
2/11/2008 |
|
TR6058 |
11 |
Aerospace series - Cable code identification list |
Elec |
20/3/2008 |
|
prEN6059-501 |
P1 |
Aerospace series - Electrical cables, installation Protection sleeves - Test methods - Part 501: Voltage proof test |
Elec |
7/6/2008 |
|
prEN6059-502 |
P1 |
Aerospace series - Electrical cables, installation Protection sleeves - Test methods - Part 502: Resistance to electrical arcs |
Elec |
7/6/2008 |
|
prEN8.4301 |
P1 |
Aerospace series - Welded and brazed assemblies for aerospace constructions - Joints of metallic materials by electron beam welding - Quality of welded assemblies |
Mat-M |
10/7/2008 |
|
prEN9100 |
P3 |
Aerospace series - Quality management systems - Requirements (based on ISO 9001:2000) and Quality systems - Model for quality assurance in design, development, production, installation and servicing (based on ISO 9001:1994) |
Qual |
31/8/2008 |
|
prEN9300-005 |
P1 |
Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - PART 005: Authentication and Verification |
Eng-Proc |
10/10/2008 |
|
prEN9300-007 |
P1 |
Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - PART 007: Terms and References |
Eng-Proc |
10/10/2008 |
|
prEN9300-100 |
P1 |
Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - PART 100: Common concepts for Long term archiving and retrieval of CAD 3D mechanical information |
Eng-Proc |
10/10/2008 |
|
prEN9300-110 |
P1 |
Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - PART 110: CAD mechanical 3D Explicit geometry information |
Eng-Proc |
10/10/2008 |
|
prEN9300-115 |
P1 |
Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - PART 115: explicit CAD assembly structure |
Eng-Proc |
10/10/2008 |
|
