|Form: prEN||Registration Number: 9300-120||Edition: P1|
|Date of Publication: 28-Feb-2019||Number of pages: 25|
|Document Type:||Domain: Digital|
|Scope: 1.1 Introduction
This document defines the requirements for the long term digital preservation of the presentation of Product and Manufacturing Information (PMI) with their possible links to the 3D explicit shape and geometry of single CAD parts. The goal is to preserve this 3D information with respect to the geometry and related PMI produced by the original CAD system, following the principles laid down in EN 9300-003 “Fundamentals and Concepts”.
The requirements of EN 9300-110 “CAD mechanical 3D explicit geometry information” about the preservation of the 3D explicit shape shall apply within this document.
The meaning of terms "Presentation" and "Representation", defined in the EN 9300-100 “Common concepts for Long term archiving and retrieval of CAD 3D mechanical information” is required to understand this EN 9300 document.
1.2 In scope
The following outlines the total scope of this document:
— the Presentation of 3D geometrical dimension and tolerance, and 3D annotation attributes;
— their possible semantic links with 3D Geometric shape;
— User Defined Attributes: that are assigned to 3D geometric entities or at the part level.
For the purpose of this document, the semantic definition is at the level that supports associative “Cross-highlighting”, to illustrate the portion of the geometry to which a PMI element applies.
In this version, the technology used to preserve this 3D information is based on polyline and tessellated presentation. Polyline presentation is a conversion to lines and curves of all 3D annotations by the STEP interfaces of the CAD system, including validation properties. Tessellated presentation is a conversion to tessellated curves and tessellated faces. The main use cases are the Certification and Product Liability of static information, however, re-use is also possible after the deletion of previous PMI and creation of new PMI (refer to clause 3 for definition).
|Status: Published||Replaced by:|
Normative References: ASME Y14-41:2012 ASME Y14.5 CAx-IF Recommended Practices for PMI Polyline Presentation (AP203/AP214) CAx-IF Recommended Practices for the Representation and Presentation of Product Manufacturing Information (PMI) (AP242) CAx-IF STEP Recommended Practices for User Defined Attributes EN 9300 (All parts) ISO 10303-101 ISO 10303-203:2011 ISO 10303-214:2010 ISO 10303-242:2014 ISO 10303-42 ISO 10303-514 ISO 10303-519 ISO 1101 ISO 16792:2006